 RELINES
AND LINING
Polyurethane Lining for Mass Finishing Equipment
Abrasion Resistant Linings
- Environmentally safe, state-of-the-art method of
lining removal
- Cold poured polyurethane
- 75, 83, 90, 95 durometer shore A hardness to
match the application
- Engineered by Roto-Finish, leaders in mass finishing technology since 1940
 |
 |
Before |
After |
Cold Pour: Polyurethane is an elastomer used to prolong equipment life against
abrasion. The cast in place technology of urethanes allows for consistent part
dimensions with varying weldments.
- 75 Durometer - Cold cast material primarily used for burnishing, but is also
used for deburring and cleaning operations with ceramic and plastic media
- 83 Durometer - Polyester urethane for high abrasion, dry or solvent applications
- 90 Durometer - Used for high abrasion, wet applications
- 95 Durometer - Used primarily for separation screens
Technical Procedure
- Old linings removed with environmentally safe, state-of-the-art method
- Equipment inspected
- Equipment properly prepared and primed
- Proper mold prepared and set into place
- Polyurethane mixed to exact proportions and poured
- Mold removed
- Cured to required specifications
- Inspected and checked for hardness, thickness and workmanship
- Gate and internal plumbing installed
Detailed Technical Procedure (PDF file)
Warranty: Warranty on bond and proper mix ratio (wear is dependent on parts
and process).
Support Service: Specialists are available for advice, trouble shooting and
service.
Structural and other repairs made at reasonable rates.
Return to Products Index |